Home > GTO Pro Gate Operators >


Alternative Views:

Our Price: $885.00
BUY NOW, Please Call us with any question you may have @ 512-583-3059

Product Code: SW3000XLS

GTO/PRO PRO-SW3000XLS Swing Gate Operator

  • Click for more info!12 volt system, no electrician needed for installation
  • Gate will work during electrical power outage
  • Quick and easy installation, with user friendly instructions
  • Solar Panel Charger available for remote locations
  • Will operate a gate up to 16' wide and weighing up to 650 lbs. each leaf (minimum size gate 5' wide each leaf)
  • Can operate 90 to 190 gate cycles during peak hours of operation, depending on gate size and weight (see cycle chart link below)
  • Control box can be mounted in protected area away from receiver (may require longer cables)
  • Receiver unit with antenna and 10' cable can be placed in best location for reception of signal
  • Can be operated by remote transmitter, digital keypad, push button or combination
  • Full systems capable "add on ready" heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (0-120 seconds).
  • High cycle capability with true soft start and stop operation
  • Full access ready package includes battery, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a standard installation.
  • Can operate as 'push to open' or 'pull to open' (specify when ordering - extra hardware required for push to open)
  • UL rated for Class I, II, III & IV. System certified to be in compliance with UL 325, 5th edition.
  • Two-year limited warranty applies to replacing parts from GTO, Inc.

Technical Specifications:

  • Powered by resilient 12 volt motor, 16:1 planetary gear drive system.
  • Temperature rating of motor: -5ºF (-20ºC) to +160ºF (+71ºC)
  • Opening time is 15-18 seconds.
  • Range of arm stroke is up to 16" (41 cm), with arm fully retracted is 40.25" (102 cm), mounting point to mounting point.


The PRO-SW3000XLS system is powered by a 12 volt DC/7.0 amp hour, sealed, rechargeable battery (included).

  • Optional second battery fits in control box, used for solar applications or high traffic applications, if needed
  • Battery charge maintained by a 120V AC/60 Htz input, transformer rectified to 14 V DC through the GTO Control Board. NOTE: Transformer should never be connected directly to any battery.
  • Optional GTO Solar Panel Charger: float voltage 14.5 V DC output from a 19-3/8" (49.21 cm) x 15-1/4" (38.74 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
  • Battery heater recommended for zones where temperatures drop below freezing for extended periods of time to prevent cold weather discharge.
  • The GTO control board can be programmed for pull-to-open or push-to-open.
  • Adjustable auto close, obstruction sensitivity and dual gate sequencing.
  • Slow Start/Stop for added cycles and system life.
  • Auto-memorization of digital transmitter code.
  • Charging regulated circuit on control board. "Sleep draw" is 40 mA; "active draw" is 2 to 7 amps.
  • GTO remote-mounted RF receiver tuned at 318 MHz.
  • Operator arm
  • AC transformer
  • 12 volt battery
  • Control box/control board
  • Receiver with 10 ft. cable
  • Entry transmitter
  • 6 ft. power cable
  • Mounting hardware
  • Installation/safety manual
  • Caution signs.
  • Warning Beeper
  • Adjustable obstacle-reversing safety feature

Share your knowledge of this product. Be the first to write a review »