Home > Access Control Devices >


Our Price: $250.00
BUY NOW, Please Call us with any question you may have @ 512-583-3059


Self-contained keyless entry system
Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
Up to 480 programmable input codes
  • The Model AK-11 Exterior Digital Keypad is a digital keyless entry

  • system designed for access control applications. The keypad is housed in
  • a rugged cast aluminum enclosure that can be mounted to a pedestal or
  • bolted directly to a wall. The die-cast keys have bright, easy-to-read
  • yellow graphics.

  • Up to 480 entry codes, from 1 to 6 digits in length, can be programmed.
  • They can activate either, or both, of the relay outputs. Relay #1 has a 5
  • Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for
  • timed or latch-on/latch-off toggle operation per each individual entry
  • code. The on or off toggle state of a relay is maintained even after
  • power interruption. When power is restored to the keypad, each relay
  • will assume the state it was in when power was removed.

  • Two indicators show the status of the entry system. The left indicator
  • lights red to indicate power, then turns green when access is granted.
  • The right indicator lights yellow when the keypad is in lockout
  • condition (from too many incorrect code entries). The keypad's courtesy
  • light illuminates the keys. The light can be programmed to activate
  • indefinitely, or for 1, 2, 3, or 4 minutes after the last key press, or
  • not light at all. An internal sounder beeps when each key is pressed.

  • The DOOR SENSE/INHIBIT input can be used two ways. If programmed for
  • "door sense", a switch on the door detects forced entry or door ajar
  • situations. If programmed for "inhibit", the input can be wired to a
  • "service" switch or automatic timer that will disable the Relay #1 when
  • required.

  • The REQUEST-TO-ENTER input can be wired to a pushbutton or fire access
  • keyswitch to provide codeless entry for authorized personnel. The
  • "anti-passback" feature prevents using the same code twice before the
  • programmed time elapses.

  • The ALARM SHUNT output activates when access is granted. This output can
  • be wired to shunt alarm contacts on the access door/gate to prevent
  • triggering of an alarm when authorized access occurs. Two solid state
  • outputs, capable of switching 100 mA to common, are programmable to
  • signal forced entry, door ajar, lockout, alarm circuit shunting,
  • request-to-enter, and keypad active conditions.

Share your knowledge of this product. Be the first to write a review »